12" In-Ground First Flush Diverter
Buried and out of site, an In-Ground Diverter is perfect for sloping allotments. On a site with a minimum slope, an In-Ground Diverter allows a 'wet' system to be converted to a 'dry' system.
Innovative and cost saving. In addition to acting as a first flush diverter, this diverter also allows a "wet" system to be converted into a "dry" system. There are 2 main reasons why many systems are "wet". Firstly, due to the size of the buildings or the placement of the tank being away from the buildings, meaning that there are long runs of pipe underground leading to a riser at the tank. Secondly, to reduce the water from freezing, water is diverted below the freezing level of the ground in areas with cold climates. On a sloping site, this diverter ensures the diverted water AND the water that would normally remain in the pipes empties out. The result - a "dry" system that saves water and improves water quality.
- Requires standard 12" PVC which can be purchased at a local plumbing supplier
- Requires minimum 5 degree (1:12) slope
- Diverts approximately 6 gallons per foot of 12" pipe
| "Wet" System Conversion: |
|---|
|
|
| Diversion Recommendations for the Roof |
|---|
| Minimal
Pollution: divert 0.0125 gallons per square foot of roof area Open field, no trees, no bird droppings, clean environment Substantial Pollution: divert 0.05 gallons per square foot of roof area Leaves and debris, bird droppings, various animal matter, e.g. dead insects, lizards, etc. Example for a minimal polluted roof of 1,000 square feet: 1000 square feet X 0.0125 = 12.5 gallons to be diverted Example for a heavily polluted roof of 1000 square feet: 1000 square feet X 0.05 = 50 gallons to be diverted |
| PVC Pipe Specifications |
|---|
| 3"
Downspout diverters: Use 3" Schedule 40 PVC (not sewer and drain pipe) Storage capacity: Each 3 foot section of 3" PVC holds approximately 1.1 gallons of water (0.3840341 gal/ft) 4" Downspout diverters: Use 4" Schedule 40 PVC (not sewer and drain pipe) Storage capacity: Each 3 foot length of 4" PVC holds approximately 2 gallons of water. (0.661312 gal/ft) 12" First flush diverters: Use 12" Schedule 40 PVC Storage capacity: Each foot of 12" PVC holds approximately 6 gallons of water. (5.81463286 gal/ft) |
